3 Car Garage Apartment Plan 76038

• PDF File: $745.00
• Right Reading Reverse: $145.00
  All sets will be Readable Reverse copies. Turn around time is usually 3 to 5 business days.

Available Foundation Types:

• Slab : No Additional Fee

Available Exterior Wall Types:

• 2x6: No Additional Fee

Prices subject to approval prior to fulfillment.

• Shipping Policy

Total Living Area:	1173 sq ft
Main Living Area:	369 sq ft
Upper Living Area:	804 sq ft
Garage Area:	1177 sq ft
Garage Type:	Detached
Garage Bays:	3
Foundation Types:	Slab
Exterior Walls:	2x6
House Width:	54'
House Depth:	40'
Number of Stories:	2
Bedrooms:	2
Full Baths:	1
Half Baths:	1
Max Ridge Height:	26'2 from Front Door Floor Level
Primary Roof Pitch:	12:12
Roof Load:	32 psf
Roof Framing:	Truss and/or Stick
Porch:	46 sq ft
Main Ceiling Height:	8'
Upper Ceiling Height:	8'

The RV garage portion of this comination garage plan has a sixteen foot high ceiling accessed through a fourteen foot high by twelve foot wide overhead door. The one and one half car garage has an eight foot high ceiling with two seven foot high by nine foot wide overhead doors. The half garage portion is 12'-6" deep, perfect for a small car, boat, motorcycle, ATV or a gardening storage space.

The covered porch opens into the vaulted entry with direct access to the guest bedroom which contains a conveniently located half bathroom and laundry facilities.

The second level is an open concept plan centred around a massive kitchen island. The Master Bedroom is flanked by a four piece Master Bathroom and a spacious Wal In Closet.

Plans are designed with a concrete slab foundation plan.

These designs packages usually run between three and five 24" x 36" sheets.

Working drawings usually comprises of the following:

General notes. Site plan at 1/8"=1'-0". Foundation plan at 1/4"=1'-0". Some plans have foundation options, client to specify at time of order. Two cross sections at 1/4"=1'-0". Details as required. Main floor plan at 1/4"=1'-0". Second floor at 1/4"=1'-0", if applicable. All four elevations at 1/4"=1'-0". Structural floor / roof information indicated either on the floor plans or separate framing plans for complicated designs. Plans are engineered by a structural engineer, but not stamped or sealed. Ground snow load 40 psf. (or composite roof live load 32 psf, dead load 10 psf for total roof design load 42 psf) Floor live load 40 psf. Assumed soil bearing capacity 1560 psf.

Electrical fixtures / switches / smoke alarms by location on floor plans. Plumbing fixtures by location on floor plans. Windows are called out as generic nominal sizes on floor plans, opening directions indicated on elevations.

Items not including with plans: Interior cabinet elevations. Window schedules.

Situations beyond the scope of these drawings: High wind speeds. Seismic, shear walls, holddowns, nailing patterns. Energy code compliance.

Receive a FREE modification estimate in one of 3 ways. Our modification team is ready to help you adjust any plan to fit your needs. The ReDesign process is simple and estimates are free!

1. Complete this On-Line Request Form

2. Print, complete and fax this PDF Form to us at 1-800-675-4916.

3. Want to talk to an expert? Call us at 913-938-8097 (Canadian customers, please call 800-361-7526) to discuss modifications.

Note: - a sketch of the changes or the website floor plan marked up to reflect changes is a great way to convey the modifications in addition to a written list.

We Work Fast!

When you submit your ReDesign request, a designer will contact you within 24 business hours with a quote.
You can have your plan redesigned in as little as 14 - 21 days!

We look forward to hearing from you!

Start today planning for tomorrow!

We are sorry, but an estimated cost build report is not available for this particular plan.

Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.

Common Q & A