Our plans include the following:
1- Exterior elevations showing the front, rear and sides, with window nomenclatures, roof pitches and any necessary dimensions.
2- Basement foundations with poured concrete walls. Plans show required footings, beams and cross sections of each type of wall. Also shown are the locations for a future bath, a scapewel with egress window and the proposed locations for the furnace, water heater and electric service.
3- A detailed floor plan showing all exterior and interior dimensions, window locations and manufacturer code numbers (Andersen or Pella), all door opening sizes and door swings, cabinet layouts and a proposed electrical layout.
4- A complete truss roof plan (note: truss roofs must be engineered by the manufacturer).
5- Cross sections of all areas that a builder/carpenter would require.
6- General specification drawing in ½” scale
Want to make changes?
Receive a FREE modification estimate in one of 3 ways. Our modification team is ready to help you adjust any plan to fit your needs. The ReDesign process is simple and estimates are free!
QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:Do your plans come with a full plumbing and electrical schedule? Window,door,cabinet and trim details? Are any or all of these the contractors responsibility. Thank you, Jared Pattengale Wineglass Construction
A:Answers to your questions:
All of my plans show the following;
1- Proposed electrical layout, showing suggested locations for lights, switches, outlets (duplex, ground fault and 220 v) , smoke detectors and service panel. Plans also show suggested locations for phone jacks and television jacks.
2- Plumbing fixture locations, including sinks, tubs, showers, toilets, laundry tubs, water heaters and floor drains are shown on all plans. The layout and installation of water supply lines, drains and vents are NOT shown on my plans and are the responsibility of the plumbing contractor as required by the local plumbing codes.
3- All windows show the code numbers for a window manufacturer, usually Andersen, but in some cases Pella.
4- All plans include a suggested kitchen/bath/laundry cabinet layout, with all cabinet sizes shown.
Thank you for your inquiry
Date Posted: 29-Nov-12
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Got a question about this plan? Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
Photographs may show modified designs. Image quality may be compromised.
Buy This Plan
Have any Questions? Our Sales Staff is able to answer most questions and take your order over the phone. Call 1-800-482-0464 (U.S. customers) or 1-800-361-7526 (Canadian customers). If you prefer to order online click the button below.