|Order Code: 00WEB|
Small Cabin Home Plan with 872 Sq Ft, 1 Bed and 2 BathsNew 1 Bedroom House Plan 60112 from Family Home Plans has 872 square feet of living space. It would make a great starter or vacation home.
|Total Living Area:||872 sq ft|
|Main Living Area:||872 sq ft|
|See our garage plan collection. If you order a house and garage plan at the same time, you will get 10% off your total order amount.|
|Number of Stories:||1|
|Max Ridge Height:||18'5 from Front Door Floor Level|
|Primary Roof Pitch:||6:12|
|Porch:||304 sq ft|
|Main Ceiling Height:||9'|
Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
A: Yes, See plan 60115 for the same house with a one car garage added to the right side. The plan could be modified to make it a two car garage, or open carport or whatever you need. Thanks!
A: Hello, Yes, additional licenses are available directly from the designer by emailing [email protected] Unlimited licenses are $1000, and if other available foundation types or the opposite orientation (right reading reverse) are needed in the future, they are available as a courtesy in PDF format. The presentation floor plan image, and color rendering may also be used for marketing purposes if needed. We also offer single build additional licenses for $250 per build. Thanks!
A: Hello, Many people use the tankless type water heaters which mount almost anywhere on the exterior or interior wall. Standard tank type water heater could be located in the closet beside the hvac unit, in the pantry, or in the attic with a drain pan under it. Thanks.
A: Hello, This plan was created for the 2018 IRC. It is not specifically designed for Arizona. Plan contents include the following- Cover page, Foundation plan with typical details, floor plan, four exterior views, typical wall section, cross section, ceiling framing, roof plan, interior cabinet drawings, and electrical layout. Please be sure to read the frequently asked questions at the website, especially the portion discussing local codes and permitting. It is likely that you will need to have additional content created, and obtain an architect or engineering stamp, depending on your local permitting requirements. One source for architect and engineering stamps is unlimited-options.com. They are a third party plan modification company. They have also helped many of our previous clients obtain the necessary stamps such as what your inquiring about. You can email them and ask about your specific county. They seem to have a network of people and have always been able to assist clients with this sort of issue. Thanks.
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.Add to cart