QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:would this house plan have enough room under the rafters to have an open loft?
The roof pitch is to low.
Date Posted: 27-Jan-20
Q:What are the ceiling heights? Is it open beams?
A:The great room is vaulted with an exposed ridge beam and a wall height of 8'-0". The bedrooms & bath rooms are framed with roof trusses with a flat celing at 8'-0".
Date Posted: 22-Jan-20
Q:I am wondering first how small the shower stalls are, and also if there is a way to make one of the bathrooms bigger as this will be our retirement home by the lake.. Love the plan.......
A:The showers are 32"x34".
The furnace & water heater can be installed in the storage room and the washer and dryer can be stacked to allow the bath room to expand into that space to
add 3'-0" to the width of the room.
Date Posted: 06-Mar-19
Q:Does the plan show structural. Does it show LVL or steel beams?
A:The plan shows structural elements.
The beam is a W8x18 steel beam, a structural engineer can substitute a LVL beam.
Date Posted: 05-Jun-18
Q:Hello, do you have this plan without the garage? Thanks
A:See plan 94307.
Date Posted: 01-Jun-17
Q:Do you have this plan minus garage?
A:Please look at plan number 94307.
Date Posted: 01-Sep-16
Q:We are interested in this layout, but the numbers don't make sense to me. The dimensions on the living room seem way too small if the other numbers are right. Is there a mistake somewhere? -Jeanne
A:The Great Room is: 23'-4" x 11'-4"
Date Posted: 08-Mar-11
Q:here does the water heater and mechanical fit? does the plan come with stuctural drawings full to obtain a permit?
A:The water heater and furnace are next to the washer/dryer on the left side of the plan. The drawing contains all structural information, however the plans are not engineered for local site conditions such as soil, wind or snow loads. You will need to have a local building offical or structural engineer review the drawing to confirm that they meet the local codes and conditions.
Date Posted: 17-Dec-10
Q:What is the dimensions of the garage? thank you for your reply. Rebecca Haight
A:The garage is 12'-0"x20'-0"
Date Posted: 22-Feb-10
Q:I WOULD LIKE TO KNOW WHERE THE KITCHEN IS AND WHAT IS THE AREA USED FOR AS YOU WALK OUT OF THE BEDROOM THAT IS ON THE OPPOSITE SIDE OF THE GARAGE? LOVE THIS DESIGN. THANK YOU
A:The Kitchen is located along the wall that separates the bath rooms from the great room, and the space outside of the bedroom on the left side is the furnace, water heater, and laundry. The space between the garage and the hall on the right side is a storage area.
Date Posted: 30-Jul-09
Q:where does the clothes dryer vent to the outdoors? it seems to be hooked to an interior wall.
A:The dryer vents down through the crawlspace to the outside wall across the hall, if built with a concrete slab the vent would be routed through the ceiling.
Date Posted: 27-Apr-09
Q:Can this plan be designed with a daylight basement?
A:Yes, the stairs would be located where the washer/dryer, and the furnance is now located.
Date Posted: 23-Feb-09
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Got a question about this plan? Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
Have any Questions? Our Sales Staff is able to answer most questions and take your order over the phone. Call 1-800-482-0464 (U.S. customers) or 1-800-361-7526 (Canadian customers). If you prefer to order online click the button below.