| Order Code: 00WEB |
House Plan 59120
Country, Southern, Traditional Style House Plan 59120 with 1200 Sq Ft, 3 Bed, 2 Bath
sq ft
1200beds
3baths
2bays
0width
30'depth
32'
Click Any Image For Gallery
Plan Pricing
Available Foundation Types:
Available Exterior Wall Types:
Prices subject to approval prior to fulfillment.Specifications
| Total Living Area: | 1200 sq ft |
| Main Living Area: | 600 sq ft |
| Upper Living Area: | 600 sq ft |
| Garage Type: | None |
| See our garage plan collection. If you order a house and garage plan at the same time, you will get 10% off your total order amount. | |
| Foundation Types: | Crawlspace Stem Wall Slab |
| Exterior Walls: | 2x4 |
| House Width: | 30' |
| House Depth: | 32' |
| Number of Stories: | 2 |
| Bedrooms: | 3 |
| Full Baths: | 2 |
| Max Ridge Height: | 22'9 from Front Door Floor Level |
| Primary Roof Pitch: | 6:12 |
| Roof Load: | 30 psf |
| Roof Framing: | Stick |
| Porch: | 353 sq ft |
| 1st Floor Master: | Yes |
| Main Ceiling Height: | 8' |
Plan Description
This is a great design with very efficient use of space. Home features include a covered front and rear porch for those evening sunsets with your family, a screened porch for entertaining, a large great room, three bedrooms with walk-in-closets, and even a space for that home office that you've always wanted. This house has it all!
Special Features:
What's Included?
Floor Plan/Plans (scale: 1/4" = 1' - 0")
Cabinet Elevations (scale: 3/8" = 1' - 0")
Electrical Plan Layout with Electrical Symbols Legend
Exterior Elevations (typically 4)
Typical Exterior Wall Section (scale: 3/4" = 1' - 0")
Section Thru Building (usually 1/2" = 1' - 0", transverse section)
Roof Drainage Plan (scale: 1/8" = 1' - 0")
Foundation Plan and Details (plan scale: 1/4" = 1'-0"; details: 3/4"=1'-0")
Short-form FHA/VA Specifications form
License to Build
Plans range in number of pages from 5 to 13 pages on 24" x 36" sheets. Any plan less than 1200 heated sq ft is formatted on 18x24 size paper. Printed on a wide-format xerox machine to guarantee quality of the prints and very good legibility. Prints are printed on white bond paper. Reproducible plans are printed on eraseable vellum.
This Plan is a USDA Rural Development Certified Plan
Modifications
Plan modification is a way of turning a stock plan into your unique custom plan. It's still just a small fraction of the price you would pay to create a home plan from scratch. We believe that modification estimates should be FREE!
We provide a modification service so that you can customize your new home plan to fit your budget and lifestyle.
Simply contact the modification department via...
Email Us This is the best and quickest way to get a modification quote!
Please include your Telephone Number, Plan Number, Foundation Type, State you are building in and a Specific List of Changes.
It's as simple as that!
Cost To Build
What will it cost to build your new home?
Let us help you find out!
Accurate. Fast. Trusted.
Construction Cost Estimates That Save You Time and Money.
$29.95 per plan
** Available for U.S. and Canada
With your 30-day online cost-to-build estimate you can start enjoying these benefits today.
- INSTANT RESULTS: Immediate turnaround—no need to wait days for a cost report.
- RELIABLE: Gain peace of mind and confidence that comes with a reliable cost estimate for your custom home.
- INTERACTIVE: Instantly see how costs change as you vary design options and quality levels of materials!
- REDUCE RISK: Minimize potential cost overruns by becoming empowered to make smart design decisions. Get estimates that save thousands in costly errors.
- PEACE OF MIND: Take the financial guesswork out of building your dream home.
- DETAILED COSTING: Detailed, data-backed estimates with +/-120 lines of costs / options for your project.
- EDITABLE COSTS: Edit the line-item labor & material price with the “Add/Deduct” field if you want to change a cost.
Home-Cost.com’s INSTANT™ Cost-To-Build Report also provides you these added features and capabilities:
Q & A
Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
Previous Q & A
A: Hello, This plan calls for prefab floor joists for the first and second floor subfloor. It could easily be stick built with dimensional lumber if desired. The lumber type could be changed by the builder onsite if needed. The roof comes with dimensional lumber size and spacing, but it could also be changed to trusses which would be designed by the local truss company anyway. Thanks.
A: 16" I joists for the crawlspace and the subfloor between first and second floor. It could be revised for regular lumber, but that will make it much more difficult to install central ac ducts. Thanks.
A: Hello, This plan is not specifically designed to meet the 130 mph wind rating. Most predrawn plans are designed for more typical conditions, which is less than 110 mph. The plan packages have to be general in nature, in order to be useable in any area. There are no high wind strapping or bracing details included. It is possible to add high wind strapping and wind bracing to this plan, or any other, to meet the 130 mph wind zone. Methods for doing that are illustrated in the Wood frame Construction Manual, for up to 130 mph wind. Wind speeds above that have to be designed by an engineer. We recommend hiring a local designer to add details for the 130 mph wind since local people are the only ones likely to know everything required by your local codes. Florida has its own codes, so we are unable to assist with that item. Your local designers probably already have a standard sheet of details for this purpose. You can go to http://www.aibd.org/for_consumers/find_a_design_professional.php to find a design professional in your area. There's a long list of them and you can search by zip code, state, etc.... House Plan packages typically include these items- Foundation plan, floor plans, four exterior views, roof plan, ceiling framing, roof framing, wall section, full cross section through house, stair section (if it has stairs), electrical plan, interior cabinet drawings, and misc. details. Predrawn house plans do NOT include an Architect or engineering stamp, mechanical plans (plumbing, heat and ac), Plot plans, or anything else not listed above. If your permit process requires you to have an architect or engineer stamp, consider purchasing the CAD file plan package so that they can review and revise anything that’s needed to meet your local codes easily. The plans are designed to meet the International Residential Code in effect at the time and place of creation. This plan was initially designed to meet the IRC 2006 edition. Predrawn house plans may or may not meet your local codes. It is unlikely that you will find any predrawn house plan specifically designed to meet the Florida codes, unless the designer lives in Florida, and just so happened to have designed the plan for that area initially. Please read the section under Frequently Asked Questions concerning Local codes for more information. Thanks.
Common Q & A
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
FHP Low Price Guarantee
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Call 800-482-0464
Related Plans
Featured Plans
